Altis Teknoloji

Home

/

Sectors

/

Manufacturing

Sector

Factory · Production Line · Maintenance · Energy

See line efficiency, machine health and energy — on the same screen.

Data from sensors, PLCs, SCADA, and energy meters comes together in Predictivo's single operational intelligence layer. OEE scores, predictive maintenance alerts, line performance, and energy consumption are monitored in real time; alarms and actions are automated with a visual rule engine.

Platforms used:

Predictivo

TagAndTrace

Facility · Line 02 · Shift B

live

08:14 · 4h 14m

OEE

82.4%

▲ 3.2 vs yesterday

Output / hour

412

target 400

Active Alarms

2

1 critical · 1 warning

Line 02 · Station Health

live · vibration · heat · OEE

CNC-01

86

Machining

CNC-02

50

Vibration ↑

WELD-03

25

Maintenance suggested

QC-04

90

Quality

PACK-05

80

Packing

Energy Consumption · last 12 hours

142 kWh · ▼ 7%

Critical

WELD-03 · Vibration threshold exceeded 4.8 mm/s — work order created

2m ago

In Manufacturing Operations

Sound familiar?

On modern production lines, data is everywhere — but it doesn't reach the right person at the right time. This disconnect turns into unplanned downtime, quality issues, and wasted energy.

∼ 30%

Invisible OEE loss

When availability, performance, and quality aren't measured together, real efficiency stays hidden in reports; improvement becomes guesswork.

× Hours

Unexpected downtime

Machine vibration, heat, or current signals trouble a day in advance, but no one sees it. The failure erupts mid-shift when it could have been scheduled for planned maintenance.

↑ kWh

Opaque energy use

The monthly bill tells you the total amount; it doesn't show how much energy was consumed by which line, which shift, or per unit produced.

~ Manual

Records written into Excel

The operator enters data into Excel at the end of the shift; the report comes out a day later. By the time a problem is noticed, it's already too late to act.

Solution Map

In manufacturing, every data source has the right platform

Different data sources in the manufacturing ecosystem require different capabilities. Predictivo handles the IoT and operational intelligence side; TagAndTrace handles product traceability on the production line.

Need

OEE & line performance

Machine health & predictive maintenance

Energy monitoring & efficiency

Ambient sensing (temperature, humidity, CO₂)

Production traceability

Management dashboards & reports

Predictivo

Industrial IoT & Operational Intelligence

Live monitoring of OEE, machine health, energy

Visual rule engine · alarms & notifications

MQTT · OPC UA · Modbus · SCADA connectivity

Automated PDF reports · shift comparison

TagAndTrace

Product traceability & line orchestration

Station-based RFID / barcode reading

Operator, part, and lot traceability

Automatic logging to MES / ERP

Label printing · product → quality chain

Result

Live OEE & performance

Failures detected in advance

Line / product-level energy

Lot ↔ quality traceability

Shift comparison

MES / ERP parity

Manufacturing Scenarios

6 actionable solutions for the factory

The scenarios below can start with a pilot line or a group of machines; once validated, they roll out across the entire facility.

Live OEE & Line Performance

A live OEE score calculated from the Availability · Performance · Quality triad. Comparable by shift, line, and product; daily lost minutes become transparent.

Predictive Maintenance

Vibration, temperature, current, and runtime data are analyzed to detect failure risk early. When a threshold is exceeded, a work order is created automatically and an SMS is sent to the maintenance team.

Energy Monitoring & Efficiency

Electricity, gas, steam, and compressed air consumption become transparent per line, shift, and product. Above-target consumption instantly alerts the manager.

Production Traceability

Every product's journey on the line — station, operator, lot, quality check — is tracked with RFID or barcode. Recalls and root-cause analysis take seconds.

Ambient Monitoring

Temperature, humidity, CO₂, and air quality are continuously monitored across production areas; critical processes keep automatic, regulation-compliant records.

Management Reports

Daily operations, weekly performance, and monthly energy and maintenance reports are shared automatically as PDFs with management and operations teams.

Data Flow

From the sensor on the floor to the management screen, in five steps

The path a vibration sensor's reading takes to reach the KPI screen in a management meeting. At every step: the right device, the right protocol, the right decision.

01

Sensor Data

Real-time measurement from a vibration, temperature, current, or energy meter.

MQTT · Modbus

02

Gateway / Edge

Data is collected and pre-processed locally; nothing is lost even on an offline network.

Edge Gateway

03

Predictivo Core

Stored as time series; passes through the rule engine, threshold breaches are processed.

Rule Engine

04

Action

Alarms, email, SMS, work orders, or device triggers fire automatically.

Webhook · CMMS

05

Dashboard & Report

Management, production, and maintenance teams see it live on role-based dashboards.

Web · PDF

Expected Impact

When data becomes visible, the factory learns

Typical operational improvements observed in pilot projects. Results vary by field conditions, machine age, and existing operational maturity.

+10%

OEE increase

Visibility plus early intervention brings line efficiency closer to the target level.

↓ 35%

Unplanned downtime

Predictive maintenance alerts move failures to planned maintenance.

↓ 15%

Energy consumption

Line / shift / SKU-level transparency exposes idle consumption and waste.

×N

Faster root-cause

With lot traceability, quality issues are narrowed down to the relevant station and operator in seconds.

SCADA & MES & ERP Integration

Works with your existing automation infrastructure

Predictivo isn't designed to replace your existing PLC, SCADA, and MES systems — it's designed to make sense of and surface their data. Data flows both ways; the automation team stays in place, while management and maintenance teams gain a decision-support layer.

PLC / SCADA connectivity

Siemens S7, Allen-Bradley, Mitsubishi, Beckhoff, OMRON, and any OPC UA-supported SCADA.

IoT & sensors

Sensors and meters connect directly to the platform via MQTT, LoRaWAN, NB-IoT, and Modbus.

MES / ERP integration

Production orders, status, lot, and quality records; two-way with SAP, Oracle, Logo, and custom systems.

Vibration Sensor

WELD-03 · 4.8 mm/s

Threshold exceeded

> 4 mm/s · 15 min

Predictivo Core

rule engine · v2

Alarm triggered

critical · maintenance channel

CMMS / Work order

webhook

Automatic record

WO-44821 · opened

SMS / Email

maintenance engineer

Notification delivered

within 30-min SLA

Management Dashboard

live dashboard

OEE impact tracked

downtime · planned

Which questions do we answer?

By decision-maker profile

Factory digitalization isn't one person's decision — it's a team's. Each role asks different questions; our answers speak clearly to each one.

Production & Maintenance

How does it affect operations?

"Is this another system on the floor? Will operators use it? Will it interfere with automation?"

Predictivo doesn't touch your existing PLC/SCADA; it reads data via OPC UA or Modbus. There's no extra logging workload for operators — in fact, start- and end-of-shift reports become automatic. Pilots start with a single machine or a single line.

IT & OT

Security & integration architecture?

"Can we get data without touching the OT network? Is there RBAC, audit, on-prem support?"

The edge gateway can connect to the OT network in read-only mode; data flows one-way through a DMZ. The whole system runs on token-based RBAC, audit logging, and TLS. On-premise, private cloud, or hybrid deployment is supported.

General Manager / CFO

What's the return on investment?

"If we apply it to one line, how much difference will we see? How do we scale after the pilot?"

Pilots typically start with one line or one group of machines; OEE, unplanned downtime, and energy consumption are measured before and after. Typical payback is 12-18 months; after that it scales across the whole facility.

FAQ

Frequently asked questions for manufacturing

Which data is monitored in the factory?

+

OEE and line performance, machine health (vibration, temperature, current), energy consumption, ambient conditions (temperature, humidity, CO₂) and product traceability are monitored on a single screen.

Will it interfere with our existing PLC and SCADA?

+

No. Predictivo does not modify your existing PLC or SCADA; it reads data via OPC UA or Modbus. The edge gateway can connect to the OT network in read-only mode.

Which PLC and SCADA systems are supported?

+

Siemens S7, Allen-Bradley, Mitsubishi, Beckhoff and OMRON PLCs and any SCADA system that supports OPC UA. Sensors and meters connect via MQTT, LoRaWAN, NB-IoT and Modbus.

Can it be installed on our own servers (on-premise)?

+

Yes. On-premise, private cloud and hybrid deployments are supported. The system uses token-based authentication, role-based access control (RBAC), audit logs and TLS.

What does a manufacturing project cost and how long does it take?

+

Pricing and timeline depend on the number of lines and machines, the data sources and the integration scope. Contact us for a quote.

Factory Demo & Discovery

Let's measure it together at your facility

Let's look at your existing automation infrastructure, number of lines, and goals together. We'll come back with a scalable roadmap that starts with one line.