Sector
Apparel · Retail · Distribution · Store
From factory to store — every product, traceable at every point.
RFID is Altis's most mature solution area. Apparel and retail is the sector where Auto-ID technology can be applied with the highest efficiency. The TagAndTrace platform, together with the RFID tunnels and boxes designed by Altis, builds a single traceability chain from the factory to the distribution center and on to the store shelf.
Product used:
TagAndTrace
RFID Tracking · Brand X · Season SS-26
live
14,248 items
Factory
Production · Tagging
14,248 tags
Distribution Center
Dispatch Verification
13,982 / 14,248
Store
Stock & Sales
in 8,412 stores
Distribution Center Gate · Antenna DOOR-B
~3s / pallet · 2,700 tags / min
Read · 18
Shipped · 4
Missing · 2
Stock Accuracy
99.4%
vs 92% last month
Season Turnover Speed
×2.1
vs previous season
Stock Loss
↓38%
before vs. after RFID
In Retail & Textile
Sound familiar?
Fast fashion, seasonal peaks, and the disconnect between store and warehouse make it constantly difficult to have the right stock in the right store. RFID is the only technology that eliminates this disconnect completely.
↓ 65%
Stock accuracy
Inventory counted manually or via barcode can't keep pace with fast-fashion turnover; actual store stock diverges from what the system shows.
~ Hours
Slow counting
While store staff scan items one by one, closing hours stretch out; counts happen monthly instead of weekly, and problems are caught late.
∼ Invisible
Stock loss
Internal/external theft, mis-shipments, or recording errors — the discrepancy usually isn't detected until the next inventory count.
~ ↓ Turnover
Slow season turnover
When seasons change, product in the wrong location goes unsold and ends up discounted; the decision to transfer it to the right store comes too late.
Solution Map
Apparel is the most mature use case for RFID
From product to shipment, from shipment to store shelf and POS, the entire chain is orchestrated through a single Auto-ID platform. TagAndTrace is the layer at the center of that chain.
Need
RFID tag production & printing
RFID tunnel & box reading
DC shipment verification
In-store counting
Loss prevention
ERP & WMS synchronization
TagAndTrace
RFID & Auto-ID Orchestration Platform
Reader, printer, antenna management · brand-agnostic
Tag templates · EPC encoding · ZPL
Visual rule engine · shipment verification
ERP / WMS / SAP two-way integration
Single operations center for store, DC, and factory
Result
99%+ stock accuracy
×20 counting speed
Faster season turnover
Significant drop in stock loss
Correct SKU distribution to stores
Faster POS & return processing
Altis Hardware
Altis-designed RFID tunnels and boxes
The backbone of our RFID Apparel and Retail solutions is the RFID tunnels and RFID boxes designed and manufactured by Altis Teknoloji. These high-performance reading stations, capable of reading hundreds of tags at once in milliseconds, make the entire shipment-verification operation unmanned — from cartons on the production line to pallets at the distribution center.
Ultra-fast reading
Hundreds of RFID tags read at once, in milliseconds.
Enclosed-field reading
Recognizes only the products inside the tunnel/box, with no leakage to the surroundings. No false tag reads.
Conveyor & PLC integration
Together with TagAndTrace, conveyor speed control, line stopping, and PLC triggering are all managed from a single interface.
EPC Gen2 & SGTIN compliant
Industry standard; works with your existing RFID tag infrastructure.
RFID Tunnel · Altis
CARTON-04812
×64 SKU
E2 80 11 60
E2 80 11 62
E2 80 11 65
E2 80 11 68
E2 80 11 6A
+59
Read time
~120ms
In carton
64 SKU
Accuracy
100%
Retail & Textile Scenarios
6 actionable RFID solutions
TagAndTrace and Altis RFID hardware are positioned as purpose-built applications at every point in the apparel chain.
RFID Tag Production
On the production line or at the tagging station, EPC-coded RFID tags are printed automatically using data from ERP/WMS and pass verification.
Tunnel / Box Reading
In Altis-designed RFID tunnels and boxes, every SKU inside a carton or pallet is identified in milliseconds. Verification at conveyor speed.
DC Shipment Verification
At the distribution center, an RFID gate pass verifies every shipment's contents against the order. Product headed to the wrong store triggers an instant alert.
In-Store Counting
With a mobile RFID terminal, a single walk down the aisle counts the entire store inventory in minutes. Weekly or even daily counting becomes possible.
In-Store Item Location
Misplaced products or lost stock are found in seconds with a mobile terminal; staff can instantly answer "where is this item?"
Season Turnover Optimization
Live stock visibility across every store speeds up the transfer of unsold SKUs to the right location. End-of-season markdown loss goes down.
Supply Chain Flow
From factory to store shelf, in five steps
The path a T-shirt takes from leaving the production line to reaching the store shelf. An RFID read at every step, a verified system record at every step.
01
Production & Tagging
At the end of the production line, an EPC-coded RFID tag is printed and applied to every product.
RFID Printer · ZPL
02
Carton Verification
The Altis RFID tunnel/box reads every item inside in milliseconds; checks for anything missing.
RFID Tunnel · Box
03
DC Shipment
Distribution center gate RFID antennas verify pallet-level shipments against the order.
RFID Gate · WMS
04
Store Receiving
In the store back room, RFID readers bring incoming boxes into the system along with their contents.
Mobile RFID · POS
05
Shelf & Sale
In-store counting, product location search, and POS verification — one operation with mobile RFID.
Mobile RFID · POS
Expected Impact
RFID-powered retail, measurable gains
Typical operational improvements observed in apparel and retail projects. Results vary based on product characteristics, store structure, and current operational maturity.
99%
+
Stock accuracy
Continuously verified inventory across store, DC, and production; ERP variance approaches zero.
×20
Counting speed
Monthly counts become daily; stores no longer need to count during closed hours.
↓ 38
%
Stock loss
Visible inventory and RFID gate control reduce internal/external loss and mis-shipments together.
×2
Season turnover speed
Right product in the right store; end-of-season markdown loss drops noticeably.
Which questions do we answer?
By decision-maker profile
A retail RFID transformation is a team decision, not a single person's. Every role asks different questions; our answers speak clearly to each one.
Operations & Store
How does it affect staff?
"Will store staff have extra work to do? How long is the training? Will it disrupt our existing POS?"
Field operations work with familiar workflows; the mobile RFID terminal closely resembles a handheld barcode scanner. Training takes 1-2 days; it can start with a pilot store and scale to the full chain. POS stays the same and is integrated for verification.
IT & Digital
How does it fit our existing systems?
"We don't want to replace our WMS / ERP / SAP. Does it meet our security standard?"
TagAndTrace steps in as an orchestration layer, leaving existing systems in place. Two-way communication over REST, MQTT, and OPC UA, with token-based security, RBAC, and audit logs as standard.
General Manager / CFO
What's the return on investment?
"Does tag cost eat into product margin? How long does a pilot take? Which metrics are used to measure it?"
Apparel RFID tag costs have fallen to a negligible percentage of product margin. Pilots run 3-6 months; counting speed, stock accuracy, stock loss, and turnover speed are measured before and after. Typical payback is 12-18 months.
FAQ
Frequently asked questions for retail and textile
What does RFID deliver in retail and textile?
RFID makes every item traceable from the factory to the distribution center and onto the store shelf. Store counts drop to minutes, stock accuracy rises, shrinkage falls and products reach the right store faster during the season.
What are Altis RFID tunnels and boxes?
They are RFID reading stations designed and manufactured by Altis Teknoloji. They read hundreds of tags inside a carton or pallet within milliseconds without picking up tags outside, and they integrate with conveyors and PLCs.
Is it compatible with our existing RFID tags?
Yes. The solution is compatible with the industry-standard EPC Gen2 and SGTIN and works with your existing RFID tag setup.
Will our POS or ERP change?
No. TagAndTrace is added as an orchestration layer next to your existing ERP, WMS and SAP systems; your POS stays the same and is integrated for verification.
What does a retail RFID project cost and how long does it take?
Pricing and timeline depend on the number of stores, your distribution center setup and product volume. Contact us for a quote.
Retail Demo & Discovery
Let's measure together how it would work in your operation
Let's go through your brand, store count, distribution center structure, and target season scale together. We'll come back with a pilot scope and an actionable roadmap.
— Other sector solutions —